5 Different Electric Hand Planer Uses

5 Different Electric Hand Planer Uses

An electric planer is an indispensible tool for any professional woodworker or hobbyist. Whether you want to fix that creaking door or repair the fireplace, a planer can save you a lot of time and energy. If you are a beginner, then maybe you have seen others use an electric planer with ease.

Let me tell you that it might look easy and simple to shave off wood to smoothen it out but it takes a lot of practice and planning. In this article I will tell you how to use an electric planer to perform a variety of jobs within the house and onsite.

To begin with, let’s find out how you can use an electric planer for remodeling jobs. This is where this type of tool is frequently used.

Leveling of floor joists

First of all, you need to mark the joist irregularities that need to be leveled and to do that you need to level the floor joists with the help of a straightedge. You can now mark the low spots and then establish a stable platform for work.

Now use an electric planer to shave off those joists until they are flat. You need to be really careful when using a hand planer. We would recommend using an adjustable chip deflector to direct the wood chips away from your face.

Smoothen out the rough edges

You may use an electric planer to smoothen out the rough or uneven edges. You need to first place the V-side in the front shoe and do one lone pass using the planer.

After that you may go on making long and smooth passes until you have achieved the required depth.

Using a plane on door edges

If too much rain in your area has led to creaking doors, then you can fix them at home using an electric planer. Use an adjustable fence to plane out a door edge with a 5-degree angle.

You may use the planer on hingeless door edges so that the doors don’t creak and they close smoothly. In order to get a straight edge and an even bevel angle, you must stand at a point where you can make long and smooth passes using the tool.

Remove wood from backside of door casing:

You may use an electric hand planer to hollow out the backside of door casings so that they fall flat against the wall. You may need to keep good control over the cutting depth and avoid a too-thin or fragile casing that will crack while nailing.

Smoothen out the filler boards to make fitting cabinets:

You need to taper-cut the filler boards in a way that they properly fit against the wall without any gaps in between. This would require careful shaving to remove wood from the backside as well as the front side of the board.

This method is known as back beveling. You need to smoothen out the edges of the filler board by elevating the cabinet and allowing the tool to make a complete pass.

One of the biggest advantages of using an electric planer is that they can save a lot of time. These power tools have found their use in a wide variety of jobs, such as smoothing out battered edges, leveling wooden frames, and chamfering posts.

To achieve the desired results, you need experience and a good amount of practice. Equipped with the proper accessories and skills, you can use the electric planers to fix the door edges, countertops and cabinets.

They can also be used to taper and shape wood.

Safety tips when using an electric hand planer

When you use an electric hand planer, there are a few safety tips that you must always keep in mind. Similar to using other power tools, you must remember to protect your eyes and ears by wearing proper safety gear.

After you turn off the electric planer, you must ensure that there are no accidental mishaps. To protect yourself, your wood work and the tool, you should remember to set the front shoe of the electric planer facing upwards on the wood block when the cutter head stops spinning.

If you are interested in purchasing a brand new electric hand planer please visit our top 5 best electric hand planner review page.

 

Save

Save

Leave a Reply

Your email address will not be published. Required fields are marked *

*